Esoxbum
Active member
Was going to take the boat out the other evening to discover a dead battery (I think). The 24v trolling motor/accessories circuit is fine (they’re on an onboard charger), but the cranking battery is not. I have an older Schumacher charger (digital/plastic, not the really old ones that are metal with needle gauge) that apparently stopped working, so I hooked up a BatteryTender that I bought for the camper battery. After 2 days it was still charging. Is that normal for it to take so long to charge (I’m not very familiar with the BTender). I know it’s a charger/trickle charger but I didn’t think it would take that long. I bought the batteries last summer (optima blue tops) so I was actually shocked that the cranker was so low that the motor wouldn’t turn over.
My last Terrova died (13yrs or so old) the spring that covid hit and I couldn’t get a replacement for almost 2 years because of chip shortages, so my boat ending up sitting for over 4 years. I rewired most of it last summer (drilling out/replacing dozens of rivets might be worse job ever) to get all the running lights, bilges, etc all working and upgraded the trolling motor plug circuit from 8 to 6awg, but it still has occasional glitches where things (usually lights) won’t work. I think the issue is in center console where there’s 1000 wires/fuses/circuit boards. For instance there were insect cocoons/mud in the wiring harnesses from sitting.
Boat is a G3 1860 w/ Yamaha 65hp jet drive if anyone is familiar
Once I put a charger on it, if it still won’t charge I’ll take it to get checked
I think I bought all three batteries at Advance Auto ( not 100% sure. I know that they only had 1 or maybe 2 when I was there. I don’t remember if they ordered the remainder or if I got them somewhere else) so Im hoping they’ll replace it if need be (no receipt). I’d imagine they have at least a 3 yr warranty ($120 car battery at walmart does)
Ok to pull the cranking battery out of the back and set it close enough to center console to hook up to onboard charger? Would the 12 vs 24v matter?
If batteries are fine, what would be your next step in process of elimination (please don’t say check connections/fuses). Is there anything else it even could be? Safety/kill switch that you clip onto your person is functional as well.
Recommendations for new charger?
My last Terrova died (13yrs or so old) the spring that covid hit and I couldn’t get a replacement for almost 2 years because of chip shortages, so my boat ending up sitting for over 4 years. I rewired most of it last summer (drilling out/replacing dozens of rivets might be worse job ever) to get all the running lights, bilges, etc all working and upgraded the trolling motor plug circuit from 8 to 6awg, but it still has occasional glitches where things (usually lights) won’t work. I think the issue is in center console where there’s 1000 wires/fuses/circuit boards. For instance there were insect cocoons/mud in the wiring harnesses from sitting.
Boat is a G3 1860 w/ Yamaha 65hp jet drive if anyone is familiar
Once I put a charger on it, if it still won’t charge I’ll take it to get checked
I think I bought all three batteries at Advance Auto ( not 100% sure. I know that they only had 1 or maybe 2 when I was there. I don’t remember if they ordered the remainder or if I got them somewhere else) so Im hoping they’ll replace it if need be (no receipt). I’d imagine they have at least a 3 yr warranty ($120 car battery at walmart does)
Ok to pull the cranking battery out of the back and set it close enough to center console to hook up to onboard charger? Would the 12 vs 24v matter?
If batteries are fine, what would be your next step in process of elimination (please don’t say check connections/fuses). Is there anything else it even could be? Safety/kill switch that you clip onto your person is functional as well.
Recommendations for new charger?
