Who owns a drift boat, a raft, a pontoon, or other type of watercraft?

A raft should be about 5-8 thousand dollars
brand new. Anything above that and it should come complete with somebody to row me and my buddies down the river. For 30k, that person had better look like Sydney Sweeney.

I think you are confusing a raft with a "pontoon boat..." 😉
 
My wife just got a 10’, 25 lb foldable kayak made by Tucktec. It will fit in the trunk of a car w/ rear seat back dropped or perhaps not since when folded it is 39”x16”x 9”. Will be primarily used on lakes, but sluggish rivers would be ok too. Will have to experiment, but I suspect Class1 riffles will be ok as well. I plan to give it a try for fishing directly from the craft and for transport to get myself to some less accessible shoreline fishing spots. I also see potential utility on tidal creeks. With practice it supposedly takes 10 min to set up.
It is very difficult to fish out of inflatable craft unless they have a solid floor & a seat that swivels.
 
  • Like
Reactions: Kms
I fish out of a float tube, does that count for anything??
Sure, that’s a type of watercraft, isn’t it?

I had a couple float tubes too at one time, starting out with a donut shaped Caddis float tube. It was pretty functional other than trying to get in and out while wearing flippers. Later, I got a u-shaped float tube that was a godsend as far as getting in and out, and I spent many days on mine in lakes, as well as in some streams and rivers. I often also used that float tube as transportation in a couple larger rivers to get to places that I couldn’t get to otherwise.

Sometime in the late 1990’s I bought what I believe may have been one of the earliest pontoon boats designed for fishing, called the Kingfisher, that were made in Sandpoint, ID. I bought it from Nick DelleDonne while he was still operating the Evening Rise out of his home on Rt 340, east of Intercourse. That was a wonderful, if not overbuilt, watercraft, and at just over 11’ long with 19” diameter tubes, it could handle any place in the east or west I wanted to take it fishing.

Here is that boat after I took it to Montana. (You’ll notice I kept my PA license numbers on the inside of the tubes, and out of sight when I used it there.)

635F60EF5B934334AF441B06BC4CE261.jpeg
 
Sure, that’s a type of watercraft, isn’t it?

I had a couple float tubes too at one time, starting out with a donut shaped Caddis float tube. It was pretty functional other than trying to get in and out while wearing flippers. Later, I got a u-shaped float tube that was a godsend as far as getting in and out, and I spent many days on mine in lakes, as well as in some streams and rivers. I often also used that float tube as transportation in a couple larger rivers to get to places that I couldn’t get to otherwise.

Sometime in the late 1990’s I bought what I believe may have been one of the earliest pontoon boats designed for fishing, called the Kingfisher, that were made in Sandpoint, ID. I bought it from Nick DelleDonne while he was still operating the Evening Rise out of his home on Rt 340, east of Intercourse. That was a wonderful, if not overbuilt, watercraft, and at just over 11’ long with 19” diameter tubes, it could handle any place in the east or west I wanted to take it fishing.

Here is that boat after I took it to Montana. (You’ll notice I kept my PA license numbers on the inside of the tubes, and out of sight when I used it there.)

I have 2 Glideriders designed by my pal, Peter Ross of Wood River fame...

V- shaped hull and lot of innovative accessories and the ability to attach any of his tackle "bags" to the float tube to make set-up easier.

He licensed his designs to another friend of mine, the late late Steve Sparton, the ACTUAL OFFICIAL REAL DEAL Sheriff of Nottingham England when he was alive, a Shakespeare consultant and the float tube expert of England. Steve actually made the Gliderider better by incorporating better air bladders.

He called his float tube the "Red Devil" and it was red in color (or should I say colour). Since Steve's passing, I've been looking for one for a long time to no avail because they are that good.

Peter Ross, his wife Vanessa and Steve Parton were great folks to shoot the $#!+ with and do business with, when they were in business...
 
Sure, that’s a type of watercraft, isn’t it?

I had a couple float tubes too at one time, starting out with a donut shaped Caddis float tube. It was pretty functional other than trying to get in and out while wearing flippers. Later, I got a u-shaped float tube that was a godsend as far as getting in and out, and I spent many days on mine in lakes, as well as in some streams and rivers. I often also used that float tube as transportation in a couple larger rivers to get to places that I couldn’t get to otherwise.

Sometime in the late 1990’s I bought what I believe may have been one of the earliest pontoon boats designed for fishing, called the Kingfisher, that were made in Sandpoint, ID. I bought it from Nick DelleDonne while he was still operating the Evening Rise out of his home on Rt 340, east of Intercourse. That was a wonderful, if not overbuilt, watercraft, and at just over 11’ long with 19” diameter tubes, it could handle any place in the east or west I wanted to take it fishing.

Here is that boat after I took it to Montana. (You’ll notice I kept my PA license numbers on the inside of the tubes, and out of sight when I used it there.)

View attachment 1641247987

I've got 2 one man pontoons. While they suck to set up (gear, net, pfd, cooler, oars, anchor, etc) they are easy to transport and nice to fish out of. They are easy to maneuver, can be fished out of or used to get you from wading spots. I need to get them out a few times this year. I used to fish standing up while the boat was moving....as I get older, not sure I would be able to keep my balance standing up while anchored
 
I picked up a used Flycraft 2.0 last year. Only used once before I bought it. Love it. Use on the Upper Delaware.
Why are people so critical of Flycraft?

The Huge FF guy occasionally craps on them, and then his comment section will have some nerds piling on, "Yeah, spot on about Flycraft." I'm not in the know enough to get the hate.
 
Sure, that’s a type of watercraft, isn’t it?

I had a couple float tubes too at one time, starting out with a donut shaped Caddis float tube. It was pretty functional other than trying to get in and out while wearing flippers. Later, I got a u-shaped float tube that was a godsend as far as getting in and out, and I spent many days on mine in lakes, as well as in some streams and rivers. I often also used that float tube as transportation in a couple larger rivers to get to places that I couldn’t get to otherwise.

Sometime in the late 1990’s I bought what I believe may have been one of the earliest pontoon boats designed for fishing, called the Kingfisher, that were made in Sandpoint, ID. I bought it from Nick DelleDonne while he was still operating the Evening Rise out of his home on Rt 340, east of Intercourse. That was a wonderful, if not overbuilt, watercraft, and at just over 11’ long with 19” diameter tubes, it could handle any place in the east or west I wanted to take it fishing.

Here is that boat after I took it to Montana. (You’ll notice I kept my PA license numbers on the inside of the tubes, and out of sight when I used it there.)

4View attachment 1641247987
I think I had one of the first pontoon boats on the Delaware. It was called a Bucks Bag Bronco. It has a tubular steel frame. I bought it around 1987. I had it up until about 2020 when I sold it to a fellow I go to Montana with sometimes. It cost me about $800. It has very thick & durable outer pontoons made from heavy gage vinyl. Imagine 28 years and it's still floating. This is what I use now. It's for sale.
 

Attachments

  • Resized_20220827_114521.jpeg
    Resized_20220827_114521.jpeg
    449.4 KB · Views: 37
I think I had one of the first pontoon boats on the Delaware. It was called a Bucks Bag Bronco. It has a tubular steel frame. I bought it around 1987. I had it up until about 2020 when I sold it to a fellow I go to Montana with sometimes. It cost me about $800. It has very thick & durable outer pontoons made from heavy gage vinyl. Imagine 28 years and it's still floating. This is what I use now. It's for sale.
I had a Bucks Bag too, which I believe was also a Bronco. I think I also got mine around the same time as you, but I don’t recall ever using it on the Delaware. I could be wrong but I thought my frame was stainless steel something they were noted for at the time.

Bucks Bags, the company, was also noted for their excellent customer service, in addition to their high quality products (quite the opposite from a later competitor, Dave Scamming.)

Thinking of you being one of the first to have a pontoon on the Delaware in the late 1980’s, I canoed (and fished from my canoe) there starting in the mid-1970’s. I can remember more than once putting in at Hancock and floating to Hankins, and floating from Hankins to Calicoon, and never seeing another boater on the river, and maybe seeing just a couple people fishing along the shoreline the entire way.
Image being able to do that now. 😢
 
Last edited:
Nothing wrong with Flycraft. I have 2 buddies that have them. One is a two seater and other is a 3. They are more narrow and less room for gear, but they are much better on smaller waterways where you can't really take bigger rafts and definitely not a drift boat if there are no launch areas.
 
Nothing wrong with Flycraft. I have 2 buddies that have them. One is a two seater and other is a 3. They are more narrow and less room for gear, but they are much better on smaller waterways where you can't really take bigger rafts and definitely not a drift boat if there are no launch ares.

All good points. Since they are narrower they may not be as stable in heavy white water as larger rafts, for example, but that’s not what they are designed for.

Speaking of not being able to take drift boats where there are no launch areas reminds me that I sometimes used my Polaris Ranger to launch, or take my drift boat out of places that were steeper, narrower, or were otherwise difficult to get my truck or Jeep into. Here is a picture of my Polaris Ranger that I sometimes used to launch, or take my drift boat out, often between the trees just behind where my Polaris is parked here. (That would also have been an easy place to slide a Flycraft down the bank between the trees, and/or to use the Polaris.). It was licensed for road use in Montana, but I never drove it for a longer distance than 1/2 mile on the highway.).

(I’ve also used the winch on my Polaris to get my drift boat up a bank.)



IMG_4351.jpeg
 
Last edited:
I had a Bucks Bag too, which I believe was also a Bronco. I think I also got mine around the same time as you, but I don’t recall ever using it on the Delaware. I could be wrong but I thought my frame was stainless steel something they were noted for at the time.

Bucks Bags, the company, was also noted for their excellent customer service, in addition to their high quality products (quite the opposite from a later competitor, Dave Scamming.)

Thinking of you being one of the first to have a pontoon on the Delaware in the late 1980’s, I canoed (and fished from my canoe) there starting in the mid-1970’s. I can remember more than once putting in at Hancock and floating to Hankins, and floating from Hankins to Calicoon, and never seeing another boater on the river, and maybe seeing just a couple people fishing along the shoreline the entire way.
Image being able to do that now. 😢
I definitely believe that. I didn't get the pontoon boat until the late 1980's but I started to wade fish at Kellums Bridge probably the summer of 1966. Ed Van Put and I became acquainted when he was working for the DEC. He told me to go over there. Then later he turned me on to the Third Riff. It was broken water between Basket Brook & Kellums Bridge. Great nymph water. Then later he swore me to secrecy and took me to his Delaware Shangri-La. I fished there for at least ten years with just my Dad & my best friend. We had amazing fishing for rainbows. Back then the ratio of rainbows to browns was 6:1. Now it's just the opposite. At least in my experience We didn't see our first drift boat until 1985. That means for almost 20 years there were no guides floating that water. Now it's a mess.
 

Attachments

  • 17 inch wild rainbow.jpg
    17 inch wild rainbow.jpg
    143.4 KB · Views: 20
  • Back in the old days (1966).jpg
    Back in the old days (1966).jpg
    85.4 KB · Views: 22
  • Trailer (575x339) (575x339).jpg
    Trailer (575x339) (575x339).jpg
    72.4 KB · Views: 32
I say this with extreme jealousy ('cause I've only been a guest)...

You haven't lived until you've fished out of a properly outfitted bass boat...

Nice rigs guys!!
 
  • Like
Reactions: RH1
Back
Top