T. J. Forwood custom glass, Bryn mawr pa

Lamiglas sold graphite & glass blanks and there were brown S glass blanks in addition to the Lamiglas "Honey" blanks available during the time Tom was building rods.

My guess is it was built on a Lamiglas blank.
Lami's brown S-Glass blanks are much more translucent than what the pic look like and oh my are they sweet. I have a few builds on them and still rotate them in often.

The pic look like a classic fenwick blank to me.
 
My Uncle Tom and Aunt Alice.

Tell your Aunt Alice, "Fireman Nick" sends his fond regards. 🥰

She gave me the "nick" name because one day when I was hanging out at the store, Tom & I had to put out a fire that your cousins accidentally set in their "fort."

That plywood fort was located at the rear of the side parking lot at the Bryn Mawr store which was about 40 feet to the left of this sign:

Side Sign.JPG


After the fire department arrived and declared the fire officially "out" (we used the garden hose), we all went back in the store and continued our BS session like nothing happened although I'm sure your cousins caught hell after I left.

The next time I stopped by, I was wearing a kid's plastic fireman's hat I bought that got a few laughs from your aunt & uncle... 😉
 
I bought an Orvis rod from Eylers before a trip to Montana in the early 80’s. Back in the 90’s I would load my kids into a car seat and drive from South Jersey to Eylers via Ben Franklin all the way through Philly via Market Street then up Lancaster Ave. to the shop. I’d pick a nice February/March. The trip usually took most of the day. Occasionally I’d buy some stuff and my license. The shop had stacks of books on the floor and lots of other interesting things. The trip through far West Philly was an adventure and education for my kids who were both under 8 at the time.
 
Tell your Aunt Alice, "Fireman Nick" sends his fond regards. 🥰

She gave me the "nick" name because one day when I was hanging out at the store, Tom & I had to put out a fire that your cousins accidentally set in their "fort."

That plywood fort was located at the rear of the side parking lot at the Bryn Mawr store which was about 40 feet to the left of this sign:

View attachment 1641250293

After the fire department arrived and declared the fire officially "out" (we used the garden hose), we all went back in the store and continued our BS session like nothing happened although I'm sure your cousins caught hell after I left.

The next time I stopped by, I was wearing a kid's plastic fireman's hat I bought that got a few laughs from your aunt & uncle... 😉
LOL!
 
I bought an Orvis rod from Eylers before a trip to Montana in the early 80’s. Back in the 90’s I would load my kids into a car seat and drive from South Jersey to Eylers via Ben Franklin all the way through Philly via Market Street then up Lancaster Ave. to the shop. I’d pick a nice February/March. The trip usually took most of the day. Occasionally I’d buy some stuff and my license. The shop had stacks of books on the floor and lots of other interesting things. The trip through far West Philly was an adventure and education for my kids who were both under 8 at the time.

My first "good" fly rod was an Orvis graphite Limestone Special (8'6" 2pc 6wt) I bought at Eyler's around the same time after being on the fence on whether I wanted that rod or the "All Rounder: (8'3" 2pc 7wt).

At the time, Tom had a deal where you got a discount (maybe 20%? off) on any new rod if you traded in any other rod. The trade-in was donated to the Boy Scouts. I traded in my Garcia 4 Star Conolon 2111-D 7ft 2pc Medium Spinning Rod to buy the Limestone Special. I fished that Limestone Special EVERYWHERE for years, but when the bamboo bug bit, I sold it to a freind for $50.

Many years later I got sentimental and bought it back from that same friend for the same $50 and I still use it on occasion, although I have the bamboo version of the same rod that I fish more often.

Later in life I bought a bunch of Winston graphite rods from Tom, more than few on discount and they would throw in a new line for free if you also bought a reel which I did more than once. All of the rods & reels and MOST of the lines are still in my quiver and get used ALL the time.
 
Mine was an Orvis Superfine 7 wt. with the un-sanded blank. It was for fishing the Madison in October. I recently fished the Madison in July with an Orvis 5 wt. I still have the Superfine but don’t use it much.
 
To show that the world is round, some 12-15 years later the little girl in the backseat of my car on the way to Eylers in the 90s lived in a house across the street from the shop (now TCO) while attending law school.
 
One of the many the great things about Eyler's in Bryn Mawr was the big field across the street where you could take rods out for some test casting before plunking down the cash.

I still remember one day being out in that field with Ed Jaworowski who was friends with Tom & Alice and learning more than a few things about fly casting...
 
One of the many the great things about Eyler's in Bryn Mawr was the big field across the street where you could take rods out for some test casting before plunking down the cash.

I still remember one day being out in that field with Ed Jaworowski who was friends with Tom & Alice and learning more than a few things about fly casting...
Yep. Before I bought my first Orvis he let me cast it in that field.
 
Back
Top