Small stream rod

Flydog,

Not all short rods are slow; some just do not fit the requirements. I can put a fly line on a broomstick and cast 20+ feet that does not make it a short fly rod that I would fish. I like a rod that can cast itself with little effort and less arm speed to generate energy (if that makes any sense), so if you have a rod that you need to speed up or slow down then you can go up or down a line weight to make slight changes (to slow a rod you increase the line weight and speeding it up reduce the line weigh). Not everyone has several short rods,to go to when conditions change, so you need to find one that meets 90 percent of your short rod requirements and go with it.

Joe E
 
Joee has it right, at least for me. I have a 7' SClll 3wt that I slow down even more by overling it one wt. When I'm using that rod I am almost always roll casting at short distances so I need the extra wt. to load the rod. I have lines at 4,5,6 & 8 wt. and rotate among my rods depending on need to load, wind, etc. As Joe notes, it's a better system than having rods from 6 to 9 feet at 6 inch intervals.
Coughlin
 
Thanks for your imput.
Orvis Trout Bum or Winston WT. Can anyone give any compairsons? Also thoughts between 7' or 7'6". Orvis does have an advantage, less $$$$.
 
I use an 8ft. 6inch rod.
no matter how small the stream
although a bigger rod can be a hinderance in tight locations.
sometimes I can just reach out with it rather than cast
sometime u cannot even cast a smaller rod in tight places
but u can REACH farther and stay away from the fish with a longer rod

Steve98
 
Quote:
Orvis Trout Bum or Winston WT. Can anyone give any compairsons?


Yes, I own last years model 7' 4 wt trout bum and a 7'6" 4wt winston IM6 (what the WT was called before they changed thier name). They are very different rods. Do yourself a favor and find a shop that carries both and cast them.

The trout bum is a fine rod. It is the slowest graphite rod I own. It is one of the only graphite rods that is really full flexing. It roll casts well for a short rod and loads adequately at short distances. It is more packable as four pieces than the IM6 at three pieces. It tends to not do well in the wind and fighting big fish. A great dry fly rod, but can handle dries/droppers and wooly buggers well inside 35 ft.

The IM6 is the finest rod I own. It has a moderate (faster/stiffer compared to the trout bum) action and a stiffer butt . It handled surprisingly well when I used it in a windy weatern trip this past year. It roll casts well. I would also say it loads better at short distances and with backhand/unorthodox casts than the trout bum. The extra six inches makes a noticeable difference when mending. Handles big fish and heavy flies/weights/indicators a lot better that the trout bum.

Being a rod builder, I would also say the fit and finish on the Winston and components second to none....solid. The Orvis looks nice but doesn't "feel" as nice.

For me the IM6/WT is worst the extra $$$$.

Look also at the 7' 4wt TLS by Orvis and Scott G2
 
Back
Top