Skwala Carbon Wading Boots - 3 month Review

tjsingle

Well-known member
Joined
Feb 27, 2017
Messages
1,017
City
Downingtown, PA
Hey all-

I wanted to share my experiences with the Skwala Carbon Wading boot, after 3 months of heavy usage. I previously used the Simms Flyweight Access boots for a probably 3 or so years. I went through 2 pairs in that time. Those boots checked every box for me, I prefer lighter weight boots with rubber soles and good ankle support. The softer vibram soles are great paired with studs for slick rocks, but they do have a tendency to wear down quicker than a more traditional hard rubber sole. After some research, and deciding to try a new direction, I opted for the Skwala Carbon wading boot. As they were comparable to the Flyweights in weight and design.

I picked up the boots from Red's Fly Shop for $280 (First time customer coupon of $10 included), MSRP is $289. Upon Skwala customer supports suggestion, I also installed GripStuds Model 3000A tungsten carbide studs when the boots arrived. The boots feel light in hand than other comparable boots, yet well constructed with minimal exposed stitching.

One unique thing about the boots is they have tongue with basically wraps around your leg. They refer to it as a burrito wrap tongue, which is supposed to lock your foot in the boot better than a normal boot.

In the three months that I have had the boots, I believe I have about 30 days on the water in them. I first used them in Maine for fishing both fresh and saltwater, on slick rocks. At first, the boots did hurt my feet a little bit, but what I found was the actual midsole was pretty rigid compared to my Simms boots, and other footwear I have. After the second use this went away as I adjusted to them. I found that the burrito wrap tongues were perfect for me, and gave excellent ankle support. The lacing system also does not loosen throughout the day which was nice.

Out of the 30 or so days on the water, I estimate that 20 of them were days where I fished all day, and hiked a fair amount. They other 10 days were shorter days where I probably fished 3 to 5 hours. I fished these boots in:
  • Maine - Coastal including beaches, natural rock outcrops, jetty's, swift rocky rivers with boulders, mixed gravel beds, sandy streams, and muddy locations
  • Wyoming - Silty bodies of water, swift rocky rivers with boulders, mixed gravel beds, and lakeshores
  • Pennsylvania - Penns creek boulders, Silty bodies of water, swift rocky rivers with boulders, mixed gravel beds.
  • Vermont - Swift rocky rivers with boulders, mixed gravel beds.
An added benefit I have found is that these boots do not allow really any sand/sediment into them, which is good because that often times can ruin the stockingfoot of a wader. Generally speaking, after using wading boots I place them on a boot dryer and also try to remove any excess debris, and when switching to a different state/watershed I do clean my gear.

This past weekend, I looked the boots over after fishing in SEPA and minus some mud stains on the fabric portions of the boots they are basically in the same condition they were when I bought them. Also, no missing studs.

Overall, I'd give these boots a 5 out 5. While they are on the pricey end of boots, these boots exceeded my expectations in terms of durability, comfort, support, and stability.
New:
1764720091929.png

Stud install:
1764720030187.png



11/30/2025:

1764719945020.png
1764719963912.png



Highly recommend these boots, and I probably will be looking at their waders when I am due for a pair.

-Tom
 
Last edited:
Hey all-

I wanted to share my experiences with the Skwala Carbon Wading boot, after 3 months of heavy usage. I previously used the Simms Flyweight Access boots for a probably 3 or so years. I went through 2 pairs in that time. Those boots checked every box for me, I prefer lighter weight boots with rubber soles and good ankle support. The softer vibram soles are great paired with studs for slick rocks, but they do have a tendency to wear down quicker than a more traditional hard rubber sole. After some research, and deciding to try a new direction, I opted for the Skwala Carbon wading boot. As they were comparable to the Flyweights in weight and design.

I picked up the boots from Red's Fly Shop for $280 (First time customer coupon of $10 included), MSRP is $289. Upon Skwala customer supports suggestion, I also installed GripStuds Model 3000A tungsten carbide studs when the boots arrived. The boots feel light in hand than other comparable boots, yet well constructed with minimal exposed stitching.

One unique thing about the boots is they have tongue with basically wraps around your leg. They refer to it as a burrito wrap tongue, which is supposed to lock your foot in the boot better than a normal boot.

In the three months that I have had the boots, I believe I have about 30 days on the water in them. I first used them in Maine for fishing both fresh and saltwater, on slick rocks. At first, the boots did hurt my feet a little bit, but what I found was the actual midsole was pretty rigid compared to my Simms boots, and other footwear I have. After the second use this went away as I adjusted to them. I found that the burrito wrap tongues were perfect for me, and gave excellent ankle support. The lacing system also does not loosen throughout the day which was nice.

Out of the 30 or so days on the water, I estimate that 20 of them were days where I fished all day, and hiked a fair amount. They other 10 days were shorter days where I probably fished 3 to 5 hours. I fished these boots in:
  • Maine - Coastal including beaches, natural rock outcrops, jetty's, swift rocky rivers with boulders, mixed gravel beds, sandy streams, and muddy locations
  • Wyoming - Silty bodies of water, swift rocky rivers with boulders, mixed gravel beds, and lakeshores
  • Pennsylvania - Penns creek boulders, Silty bodies of water, swift rocky rivers with boulders, mixed gravel beds.
  • Vermont - Swift rocky rivers with boulders, mixed gravel beds.
An added benefit I have found is that these boots do not allow really any sand/sediment into them, which is good because that often times can ruin the stockingfoot of a wader. Generally speaking, after using wading boots I place them on a boot dryer and also try to remove any excess debris, and when switching to a different state/watershed I do clean my gear.

This past weekend, I looked the boots over after fishing in SEPA and minus some mud stains on the fabric portions of the boots they are basically in the same condition they were when I bought them. Also, no missing studs.

Overall, I'd give these boots a 5 out 5. While they are on the pricey end of boots, these boots exceeded my expectations in terms of durability, comfort, support, and stability.
New:
View attachment 1641246882
Stud install:
View attachment 1641246880


11/30/2025:

View attachment 1641246878 View attachment 1641246879


Highly recommend these boots, and I probably will be looking at their waders when I am due for a pair.

-Tom
Thanks for the review! I just ordered a pair of Patagonia Expedition Zips and was debating between Skwala Carbon or RS, Patagonia Forra, or Korkers River Ops boots to pair with them. Your review helped make my decision and I ordered the Skwala RS boots and Gripstuds.

Thanks Again,

Jim
 
Thanks for the review! I just ordered a pair of Patagonia Expedition Zips and was debating between Skwala Carbon or RS, Patagonia Forra, or Korkers River Ops boots to pair with them. Your review helped make my decision and I ordered the Skwala RS boots and Gripstuds.

Thanks Again,

Jim
Nice, glad to have helped. Hopefully they work out for you!
 
Wanted to give an update. About two weeks ago I found that one of the lace cleats on my boots broke, had no idea that it did until I went to lace up again.

Contacted Skwala, they were super helpful. Ended up sending my old boots back and they out a new pair. Really great customer service. Seems like it was a one off thing with the broken cleat. My next pair of waders will be Skwala.
 
Last edited:
Back
Top