Sitka Has Entered the Fishing Business

If I had to wear waders for a living, I could see paying that kind of money for a pair. But I don't, so I won't.

Thankfully there are plenty of quality waders avaliable for a reasonable cost on the market.
I wore waders for a living and quickly learned that catastrophic failures were always “just around the next bend” and it didn't matter to pointed sticks, hidden barbed wire deposited in streams and on the ground in riparian tangles of shrubs/grasses/weeds, or various pieces of scrap metal or rebar in streams what you had paid for your waders. The most important things were fit and lasting seams. Regardless of the design with such intensive use I might get a field season with no leaks except for pin holes from thorns and fish spines, a second season with more pinholes and need for a few patches or similar repairs, and part of a third season spent patching until sometime during that season I would give up and start a new pair. Sweating? Regardless of the brands to which I was exposed, I was active and therefore I sweated. Can’t avoid the heat and humidity in SE Pa
 
Last edited:
Simms after their most recent change of ownership is offering their 2026 G4 Z at $1100, a G3 Grateful Dead version $1000, old G4 no longer made and G3 $750, the G4 wading jacket $750. I don’t bother with or have any experience with their Freestone version as I fish way too much. The last I dealt with these guys some 4 or so years ago it didn’t go very well at all and put me in the no longer a customer category after some 25 exclusive years.
 
I wore waders for a living and quickly learned that catastrophic failures were always “just around the next bend” and it didn't matter to pointed sticks, hidden barbed wire deposited in streams and on the ground in riparian tangles of shrubs/grasses/weeds, or various pieces of scrap metal or rebar in streams what you had paid for your waders. The most important things were fit and lasting seams. Regardless of the design with such intensive use I might get a field season with no leaks except for pin holes from thorns and fish spines, a second season with more pinholes and need for a few patches or similar repairs, and part of a third season spent patching until sometime during that season I would give up and start a new pair. Sweating? Regardless of the brands to which I was exposed, I was active and therefore I sweated. Can’t avoid the heat and humidity in SE Pa
Dear Mike,

Waders are the fishing equivalent of the undercarriage on a bulldozer. They are wearable parts meant to be run to destruction. Care and maintenance matter, but only to a point. It boils down to a cost per hour over the lifetime of the waders, or the undercarriage.

At a cost of 4X the cost of any wader I've ever worn, including custom made Simms boot foot waders, I'm running a BERCO or ITM undercarriage for the rest of my time. I'll wet wade in Winter before I ever drop a Gee Whiz on fishin' pants.

YMMV,

Regards,

Tim Murphy 🙂
 
Simms after their most recent change of ownership is offering their 2026 G4 Z at $1100, a G3 Grateful Dead version $1000, old G4 no longer made and G3 $750, the G4 wading jacket $750. I don’t bother with or have any experience with their Freestone version as I fish way too much. The last I dealt with these guys some 4 or so years ago it didn’t go very well at all and put me in the no longer a customer category after some 25 exclusive years.
Really must of pissed you off.
But, As of now they still employ US workers and not someone in Vietnam or China.
But, with the new turn away from legacy chemicals on the DWR process(PETF's) any or all will become overpriced and not very good.
 
Just got a pair of the discontinued Redington Sonic Pros that I was patiently waiting for Sierra to put on clearance. $150. Much more my speed. Sorry, Sitka.

I also heard a rumor that Simms could be changing owners again. I wasn't provided with any details to substantiate this, but I don't mind repeating it anyways because I'm a bad person.
 
Dear Mike,

Waders are the fishing equivalent of the undercarriage on a bulldozer. They are wearable parts meant to be run to destruction. Care and maintenance matter, but only to a point. It boils down to a cost per hour over the lifetime of the waders, or the undercarriage.

At a cost of 4X the cost of any wader I've ever worn, including custom made Simms boot foot waders, I'm running a BERCO or ITM undercarriage for the rest of my time. I'll wet wade in Winter before I ever drop a Gee Whiz on fishin' pants.

YMMV,

Regards,

Tim Murphy 🙂
Tim, was it you who dropped perhaps the biggest pearl of wisdom in the history of PAFF many years ago, stating that for every $50 spent on waders, you could expect a season of use? Truer words were never spoken.

That's held true for me for decades. $50 Cabelas waders leaked by the end of one season. $200 Simms lasted 4 years (back when Simms was good). I'm on my 4th year with a pair of Simms Guide Pants, but alternate them with a really nice pair of Dryft waders. Both seem bombproof. The SImms were on clearance, so that might throw off the equation. And the same pair of Dryft now costs 40% more than it did two years ago. They're messing with your formula. $1000 for a pair? I can't even do the math on that one!

Apologies if that wasn't you. Maybe I'm confusing it with your formula for dry fly leaders.😊
 
Tim, was it you who dropped perhaps the biggest pearl of wisdom in the history of PAFF many years ago, stating that for every $50 spent on waders, you could expect a season of use? Truer words were never spoken.

That's held true for me for decades. $50 Cabelas waders leaked by the end of one season. $200 Simms lasted 4 years (back when Simms was good). I'm on my 4th year with a pair of Simms Guide Pants, but alternate them with a really nice pair of Dryft waders. Both seem bombproof. The SImms were on clearance, so that might throw off the equation. And the same pair of Dryft now costs 40% more than it did two years ago. They're messing with your formula. $1000 for a pair? I can't even do the math on that one!

Apologies if that wasn't you. Maybe I'm confusing it with your formula for dry fly leaders.😊
Dear TimB,

It probably was me. I have 3 pairs of under $ 100.00 waders with me in the truck all the time. Two pairs are still unworn.

In truth, I don't fish nearly as much as I used to fish in Fall, Winter, and early Spring when waders are most useful. I average about 15 to 20 days of wader wear in a big year now. But back when I fished 100 plus days a year, I still didn't wear waders much more than 15 to 20 days except when I first got serious about it and thought, do as the Roman's do.

I'm done totally with waders around Memorial Day and don't resume using them until October unless it is unusually cold. I hate the damned things!

Regards,

Tim Murphy 🙂
 
I'm gonna cop to being a "BOOMER" because it's the truth, but in 1967 you could buy a VW Bug for just under $1,500.00 and drive the Kra__ out of it for the next 20 years.
 
I'm gonna cop to being a "BOOMER" because it's the truth, but in 1967 you could buy a VW Bug for just under $1,500.00 and drive the Kra__ out of it for the next 20 years.
The numbers are shocking.

On the flip side, 1967 average wages were $5,000 and in 2025, they were $64,000.

In the not too distant future, minimum wage will equate to a $100,000 income.
 
No worries. They’ll be a lot cheaper on sierra.
 
  • Like
Reactions: CRB
I'm SOOOOOOO glad I wet wade 98% of the time and haven't had the need to buy a pair of waders in so long...

I know they won't fit anyway. 😉

No thanks...
Well, they do offer a "wet wading system."
who doens't need a system?
 
Considering the temperature of the waters I mostly fish, I don’t think I’d be getting too much value out of that add-on.

It's Cold.jpg
 
Gore-Tex and Northeast woods are not a match made in heaven. Pin holes are unavoidable, so the ability to repair on your own and the warranty are what I am paying for. Or was paying for...

I think my days of Gore-Tex are ending when my current pair(s) go to wader heaven. There are just much more durable materials out there, and to many points made above, when it gets too hot to wear Toray, wet wading is a joy I look forward to each late spring.

I have liked my Simms for the fit, mostly. If cheaper wader makers took time with offering more fits, they would probably do even better with the niche of anglers like me who grew tired of wearing trashbags with suspenders. Shorts, longs, foot sizes, stout, etc. I am not aware of any manufacturers of cheap-*** waders doing this to any measurable extent. I am missing one?
 
Adamsbuilt seems to have a variety of size options, and they have some models in the cheapish range (~$200). I almost tried a pair, but I lost the Sierra roulette game of how-low-will-the-2X-pairs-get-discounted-before-they-sell-out.

Completely off topic at this point: how do warranties generally work with regard to Aquaseal and diy repairs? Do companies get jittery about repairs/replacements if you've started mucking around in there?

I get the idea of paying for the warranty to an extent, but, at the same time, I can think of lots of scenarios where waders could fail at a time where I'm absolutely not sending them back right away and missing the fishing going on. DIY repairs are sorta a necessity, so will that compromise the value of paying for the warranty?
 
A thousand bucks for something that’s going to leak just as fast as a buck fitty pair. The high end crowd will love them until they close their doors.
 
Adamsbuilt seems to have a variety of size options, and they have some models in the cheapish range (~$200). I almost tried a pair, but I lost the Sierra roulette game of how-low-will-the-2X-pairs-get-discounted-before-they-sell-out.

Completely off topic at this point: how do warranties generally work with regard to Aquaseal and diy repairs? Do companies get jittery about repairs/replacements if you've started mucking around in there?

I get the idea of paying for the warranty to an extent, but, at the same time, I can think of lots of scenarios where waders could fail at a time where I'm absolutely not sending them back right away and missing the fishing going on. DIY repairs are sorta a necessity, so will that compromise the value of paying for the warranty?
I will have to look into Adamsbuilt, I Googled and saw the sizing chart 👍

For sure, I have found myself always having a backup pair in case the timing of sending back pricey waders for warranty repairs coincided with prime need for waders. If I use a cheap pair as a backup, they last 10 years 😉 I also put a calendar reminder in my phone before the first year is up since only the first trip out West is free. I have spent anywhere from 20 to 80 bucks to have Simms work the whole pair over, from buckles, to gravel guard hooks, to retaping seams.

I have not had Simms give me a hard time for Aquaseal-ing my own pin holes. At some point they will put a permanent marker spot or other sign that tells either the fly shop sending them back or the repair shop that they will not fix this pair again.

I have an old pair of G3s that reached that milestone, and I Flex-sealed the heck out of the crouch. I still used them in the fall surf this year, but they may need to go finally after 10 years of use....
 
Sitka is owned by Gore Tex.
The marketing almost writes itself. On the other hand it would seem the stakes are fairly high for Sitka/Gore Tex to get it right. It would be a really bad look for GT to mess up wading gear when others have made a name using their materials.
 
Back
Top