Rod Tubes

JimNovo

Well-known member
Joined
Oct 26, 2021
Messages
1,260
City
Milford, NJ
So I'm looking for a good cheap source or a DIY solution to get a rod tube for my rods that are missing a tube to call their own. $50-$70 from a vendor sure seems like a lot to spend on a tube.

You all have any ideas?
 
So I'm looking for a good cheap source or a DIY solution to get a rod tube for my rods that are missing a tube to call their own. $50-$70 from a vendor sure seems like a lot to spend on a tube.

You all have any ideas?
Dear Jim,

How many rods are you talking about and what are their lengths? Do you have rod bags for the rods?

Home Depot and Lowes and most local hardware stores sell PVC pipe is differing diameters and lengths. You'll need 2" diameter for a single rod. A 4" diameter will easily fit 3 rods if the lengths are compatible. If you have 2-piece rods add 2 inches to the anticipated length, ie. for 2 piece 9-foot rods you will need 56 inches of tubing. You can buy a butt cap section and a collar section with a screw on top. Some PVC glue and maybe some padding for the top and bottom of tube on the caps will have you all set.

Most local stores will even cut the PVC to length for you. I know my local Ace Hardware will do that even though I have a saw and a mitre box to do that myself.

Let me know if you want some pictures and I'll dig a rod or two out of the garage and post pictures of tubes I made.

If you want something professionally built with a cordura cover check Ebay. There are dozens of off brand cases available there that cost about half of a branded rod tube.

Regards,

Tim Murphy 🙂
 
Dear Jim,

How many rods are you talking about and what are their lengths? Do you have rod bags for the rods?

Home Depot and Lowes and most local hardware stores sell PVC pipe is differing diameters and lengths. You'll need 2" diameter for a single rod. A 4" diameter will easily fit 3 rods if the lengths are compatible. If you have 2-piece rods add 2 inches to the anticipated length, ie. for 2 piece 9-foot rods you will need 56 inches of tubing. You can buy a butt cap section and a collar section with a screw on top. Some PVC glue and maybe some padding for the top and bottom of tube on the caps will have you all set.

Most local stores will even cut the PVC to length for you. I know my local Ace Hardware will do that even though I have a saw and a mitre box to do that myself.

Let me know if you want some pictures and I'll dig a rod or two out of the garage and post pictures of tubes I made.

If you want something professionally built with a cordura cover check Ebay. There are dozens of off brand cases available there that cost about half of a branded rod tube.

Regards,

Tim Murphy 🙂
Tim
Thanks for the reply. I'd love to see your examples when you have time.

I have two 9' 2pc and two 9' 4pc rods...so far. I build a couple of rods each year which is the root of my issue.

Thanks
Jim
 
PVC tubes are heavy so I use them for storage, less so for travel.

I generally look around a lot to find less expensive tubes. Ebay and the sale sections of fly shops have been sources for me, but then you wouldn't get what you need right away. Even a lot of rod building sites are hit or miss on tubes.

The cheapest tubes on Amazon are about $40 - they seem to have jumped up in price. One thing to add to the price is if you need a rod bag or not. Check on that.

Just checked on White River rod tubes at Cabela's. They seem reasonable.
 
Last edited:
Tim
Thanks for the reply. I'd love to see your examples when you have time.

I have two 9' 2pc and two 9' 4pc rods...so far. I build a couple of rods each year which is the root of my issue.

Thanks
Jim
Dear Jim,

Stay tuned. I will post pictures shortly for you!

Regards,

Tim Murphy 🙂
 
Back
Top