Part needed!

RH1

Well-known member
Joined
Nov 6, 2025
Messages
403
City
Massillon
Good morning
So i started cleaning my dad's old fly reels and the pfleuger went perfectly and i found no issues in the reel.
When i opened up his Martin classic i found the pawl spring was broke, i guess that would explain the weird noise.
My question is what are the odds anyone has a spring that would work or can someone tell me where to find a comparable spring?
I really dont want to retire his reel just because of a spring.
I attached a picture of the reel I need the spring for.
Thanks in advance for any assistance!
20260109_183406.jpg

20260109_183351.jpg
 
There is a surprisingly robust market in aftermarket reel parts, although more for spinning/casting reels than fly reels. All the same, there are some fly reel parts available, especially for brands with longer histories like Martin. I'd get a schematic for the reel (almost certainly available online), identify the specific part and then go Googling, searching first on a phrase like "Martin fly reel parts". Might take a while to find what you seek, but my guess is that it can be done. One potential clue: a lot of Martin reel parts are listed under Zebco due to acquisitions, etc.

Good luck!
 
  • Like
Reactions: RH1
The Martin Classic has the same coil spring as the Martin 67 or 67SS, so if you are thinking about buying a parts reel on auction those are useful model numbers to keep in mind. Also I’ve never tried this, but I have heard that any coil spring from a retractable ball point pen will also make a useful substitute. You might want to try that first. Good luck.
 
  • Like
Reactions: RH1
Dear RH1,

There are several listed on eBay for 34.95 or best offer. One is brand new still in the plastic blister pack. Probably because the owner got tired of trying to figure out how to open the blister pack!

Regards,

Tim Murphy 🙂
 
L
Dear RH1,

There are several listed on eBay for 34.95 or best offer. One is brand new still in the plastic blister pack. Probably because the owner got tired of trying to figure out how to open the blister pack!

Regards,

Tim Murphy 🙂
Hahaha
 
Good morning
So i started cleaning my dad's old fly reels and the pfleuger went perfectly and i found no issues in the reel.
When i opened up his Martin classic i found the pawl spring was broke, i guess that would explain the weird noise.
My question is what are the odds anyone has a spring that would work or can someone tell me where to find a comparable spring?
I really dont want to retire his reel just because of a spring.
I attached a picture of the reel I need the spring for.
Thanks in advance for any assistance!

A better photo would be of the spring you need...

If it is a pawl spring and this schematic is correct, the part number is 510S:

Martin MC45 MC56.jpg


FWIW - Mike's Reel Repair may be a source.

I'm not familiar with the spring so I can't offer suggestions on substitutes or sources, but I know someone who may know and I reached out to him.

In the meantime, if your spring broke, cannibalizing a spring from a used reel may only offer temporary relief...

Good luck!!
 
A better photo would be of the spring you need...

If it is a pawl spring and this schematic is correct, the part number is 510S:

View attachment 1641247999

FWIW - Mike's Reel Repair may be a source.

I'm not familiar with the spring so I can't offer suggestions on substitutes or sources, but I know someone who may know and I reached out to him.

In the meantime, if your spring broke, cannibalizing a spring from a used reel may only offer temporary relief...

Good luck!!
Please let me know what you hear and thank you!
 
The Martin Classic has the same coil spring as the Martin 67 or 67SS, so if you are thinking about buying a parts reel on auction those are useful model numbers to keep in mind. Also I’ve never tried this, but I have heard that any coil spring from a retractable ball point pen will also make a useful substitute. You might want to try that first. Good luck.
Agree with Tups, though a photo of the internals and the spring would help. The schematic posted is likely the right one, and if so, a retractable pen spring snipped to proper length should work fine.
 
It’s just a compression spring, I think. It’s easy enough to identify the type spring by looking at the old one. Measure the broken one and simply buy a spring. Any old spring of the same size will work. There’s no need to look for part numbers and such if you have the old spring to measure.
 
  • Like
Reactions: RH1
Please let me know what you hear and thank you!

Here is his reply:

I had stainless spring stock once that I cannibalized from an R-22 single charge package once (of all things) It was just the right size, but I only kept a few inches of it, and it dwindled away.

All I could suggest is measure the helical spring and see what you can get online.
No question McMaster-Carr will have it, but I'd recommend working up a list to make their $13 UPS charge worth your time.
 
All I could suggest is measure the helical spring and see what you can get online.
No question McMaster-Carr will have it, but I'd recommend working up a list to make their $13 UPS charge worth your time.

I've found amazon to be an acceptable alternative to McMaster Carr. I've found a number of small springs, screws etc. and avoided the heavy shipping charges that way. The only catch was that some of them came direct from China, so the wait was a few weeks in one case.
 
Back
Top