Ok Orvis folks…

JG63

Well-known member
Joined
Mar 7, 2013
Messages
1,628
… can anyone fill in some blanks regarding this model/series? Specifically, USA made(?), ferrule issues with this series, approximate dating (as the butt cap doesn’t have the usual engraving), and whether or not the “Mark ll” is part of the Western Series from the ‘80s. Any info would be appreciated - TIA JG
 

Attachments

  • IMG_2308.png
    IMG_2308.png
    265.6 KB · Views: 123
  • IMG_2307.jpeg
    IMG_2307.jpeg
    232.4 KB · Views: 132
I believe it indicates an updated version of the rod, second edition, if you will, but I do not think there is any way to tell what the update consisted of
 
Perhaps - but likely this rod was made before many of their “service” reps were born - it was listed for a good price and I am a little curious

I've called Orvis about reels made in the 1970's and rods going back to the 1940's and always got an informative answer and not always from someone in their 80's. 😉
 
Good luck I have an older Sage that I had no luck on except for probably made in the 80s LOL
 
Good luck I have an older Sage that I had no luck on except for probably made in the 80s LOL
Tell me about your Sage - I’m fluent in that language as I was a dealer in the ‘80s - a few pics will help
 
That's all it says no numbers anywhere else.
 

Attachments

  • 20250813_220914.jpg
    20250813_220914.jpg
    72.7 KB · Views: 70
Bought 2 still in original plastic ,still had the 1 year warranty cards in 1 of them,both for 100$,at a yard sale sold 1 kept 1 but regretted selling the one
 
That's all it says no numbers anywhere

From what I can gather, this is a VERY early SAGE rod - 80-82 vintage - it has that “unsanded spiral” look in the light. Rods were labeled according to their series later on as there were eventually several options at different price points available at the same time (RP - RPL - LL etc) Your rod was manufactured when there were no other choices - the logo looks a little rough like they were figuring out how to finish the label - but the hand writing is unmistakable. The GFL (Graphite Fly) being the only series at the time - I’d like to see the cork and reel locking system - As SAGE was partial to Struble reel seats in their later production models. The two line option was a selling point for lots of fly tackle in those days with line mass being figured into rod loading - the smaller line weight being a Double taper and the larger number being a Weight Forward - either of which would load the rod properly as the WF has less total mass. I may be off a little with the dating but your rod was built before their “standard” nomenclature was adopted

- IE: SAGE GRAPHITE lll 389LL
#3 LINE 8’9” 2 3/8 OZ

would be an IM7 modulus graphite cloth 389 being the line weight and rod length LL being the series (in this case the Lightline Lightweight) and the line/length/rod weight specs underneath - this system has been in place for many years (see photo 1) though rod weight listings seem to have fallen out of favor. Hope this helps - I’d call Farbank/Sage to verify the actual date of that type of labeling - I know too that under the finish further up the blank, SAGE hid actual serial numbers specific to the warranty registration and you needed a card with your name and that number to make a claim - there may be one on your rod - it is in black ink (see photo 2) and you need a brighter light to locate it - if you have it, Sage could pinpoint the year of manufacture - as far as the model of your rod - I’d call it a GFL - thanks for sharing!
 

Attachments

  • IMG_2315.jpeg
    IMG_2315.jpeg
    210.4 KB · Views: 59
  • IMG_2316.jpeg
    IMG_2316.jpeg
    325.6 KB · Views: 45
Thanks JG63. That is very informative. I have a few 80s Sage Rods. This helps. Thanks.
Some different series designations from their golden age (1987- 1994):

RP = Reserve Power $$
MA = Moderate Action $
DS = Discovery Series $
RPL = Reserve Power Light $$$
RPL-X = Reserve Power Light Extra $$$
LL = Lightline Lightweight $$$
SP = Smooth Performance $$$

Sage/Farbank has made many more series - but none of the newer models are better than these - just heavier - a good 690 RPL weighed 3 ounces (!) and could cast a Cortland 444SL WF6F into the next township - modern “Six Weights” weigh over 4 ounces and require the next 1/2 - 1 full line weight to even load properly 🙄 any of the above mentioned series have held their value (albeit inflated dollars) at the $ 200-500 price point depending on the model - beware the scammers who sell finished blanks as “factory custom” type BS - many of the RPL/LL blanks Ive seen are not finished to even factory standards - the blanks have printed descriptions with the logo and are not handwritten - they usually have a “-B” after their model number like this: 790 RPL-B - there are some good buys and bad buys out there - I quit the shop with the dealership to go active duty in 1993 before they lost their dealership and went out of business about 1995. Those were good times for me - Bob Clouser had his dealership across the river from me - we were the only two Sage dealers in SC PA at one point - good times! I got to meet some big names, teach some courses, and sell some great tackle.
 
Good stuff. I have a few RPL, an RP, and a 390 XP that is a cannon. Had a 590 RPL that I loaned to a friend and he fell and broke the tip. Sage replaced it with a 590-4 Sonic.

No comparison. The Sonic just doesn't do it for me. A step or 2 down from the RPLs. I found a used 590 RPL on ebay and snatched it up immediately.

Know anyone looking for a Sonic?
 
Last edited:
Good stuff. I have a few RPL, an RP, and a 390 XP that is a cannon. Had a 590 RPL that I loaned to a friend and he fell and broke the tip. Sage replaced it with a 590-4 Sonic.

No comparison. The Sonic just doesn't do it for me. A step or 2 down from the RPLs. I found a used 590 RPL on ebay and snatched it up immediately.

Know anyone looking for a Sonic?
Not me 😏
 
Back
Top