"Needs" for fly fishing Erie Steelhead?

What's a good leader, tippet setup for steelhead.
You can get away with a 9' nylon leader, chop off the bottom 18 inches and replace with flouro. I just buy the Seaguar STS in 6lb and 8lb and use what I feel is best based upon the conditions. Best bang for your buck.
 
What's a good leader, tippet setup for steelhead.
On my 7 and 8 weights I run a 4' piece of 30 or 40lb Maxima Chameleon down to a 12" section of 15lb Maxima Chameleon as my base leader, then 4-6 feet of 3x tippet for nymphing, or 2-3 ft of 0x or 1x for streamers.

I like this setup because that gives me tons of room to adjust my indicator without hitting knots. You don’t need a lot of taper on your leader because you should have a fair amount of weight on the end to get it out there and down.

If I were going store bought I would think a 7.5ft 0x leader would make a good base then add whatever tippet you need. I wouldn't go less than 3x.
 
Back
Top