Fly rod roof rack ideas?

Dear CRB,

One way or another I need to do something about rod transport. I can deal with carrying fly rods in double-barrel DB Dunn cases from years ago. They can be carried strung up and I can be on the water faster than fiddling with a roof rack rod carrier.

But I have a 5 1/2-foot bed F-150 with a cap and a Thule roof rack. I do fish using other tactics than a fly rod. I have many one-piece rods in spinning and bait casting configurations that are essentially useless given my current truck. I have a sliding window in my truck and in my cap. I need to figure out a way to stick a piece of 4-inch PVC between those windows and still weather seal the gaps in the slider without ruining the visibility of my rear-view mirror.

Regards,

Tim Murphy 🙂j

My bed was a lot shorter than 5 1/2’, Tim. 😃 and I don’t like the idea of sticking a rod through a sliding window, so I made this aluminum rack to carry my rods and reels (fully assembled) in.

IMG_0044.jpeg


I also like those DB Dunn rod and reel cases for 2 pc. rods (I have several of them) and keep a couple fully assembled rods in them all the time.
 
My bed was a lot shorter than 5 1/2’, Tim. 😃 and I don’t like the idea of sticking a rod through a sliding window, so I made this aluminum rack to carry my rods and reels (fully assembled) in.

View attachment 1641244289

I also like those DB Dunn rod and reel cases for 2 pc. rods (I have several of them) and keep a couple fully assembled rods in them all the time.
Dear mt_flyfisher,

I need to dust the DB Dunns off and just load a 5/6 weight and a 7/8 weight set-up in them and be done with it. The only problem is that my good 8 weight is a 5 piece, and it won't fit assembled in the Dunn case. All my other rods are either 2 piece or 4 piece and none are over 9 ft in length, so they all fit.

But if I hit the Lotto I'll just buy a full-sized full-size truck with an 8-foot bed. With a cap on it you can cross 10-foot rods from the tailgate to the opposite corner of the front of cap and travel with them assembled. That's how I moved my surf spinning and casting rods back in the day.

Regards,

Tim Murphy 🙂
 
My bed was a lot shorter than 5 1/2’, Tim. 😃 and I don’t like the idea of sticking a rod through a sliding window, so I made this aluminum rack to carry my rods and reels (fully assembled) in.

View attachment 1641244289

I also like those DB Dunn rod and reel cases for 2 pc. rods (I have several of them) and keep a couple fully assembled rods in them all the time.
I made one similar to this. But with a plastic ammo box and PVC. It works well. But I'd check out the price difference of the PVC vs Aluminum first. The aluminum would be lighter but stronger.
 
I made one similar to this. But with a plastic ammo box and PVC. It works well. But I'd check out the price difference of the PVC vs Aluminum first. The aluminum would be lighter but stronger.
It’s been a few years since I made this rack but it was pretty cheap, and easy, to make at the time. I bought the couplers at PaulB Hardware in Ephrata (it actually has a Lititz address I believe) which is the most completely stocked hardware store I’ve ever been to, and then I got the aluminum pipe from PBZ Manufacturing, that I believe is an affiliated company, located just down the road. PBZ does aluminum fabricating, and they had a remanant bin, which is where I got the aluminum pipe, at a very reasonable price.
 
Back
Top