fluorocarbon tippet with a nylon tapered leader

mills

Member
Joined
Jul 31, 2024
Messages
9
City
Easton
I was reading this article on cortland ultra premium fluro tippet: https://www.cortlandline.com/blogs/cortland-stories/ultra-premium-dry-fly-tactics

But am seeking some input what the authors means when he says “The best way to fish with a fluorocarbon tippet with a nylon tapered leader is to trim back the tippet section of the tapered leader and replace it with the fluorocarbon tippet. This allows the leader to turn over properly as it was intended to, but now features all those sought-after properties of a premium Fluorocarbon Tippet.”

So he’s saying instead of running a 9ft leader, so a 7.5 ft and then run the tippet and add 1.5 extra feet to replace cutting back the leader?
 
Dear Mills,

To my way of thinking it would be best to buy 7 1/2 leaders and add 24 to 30 inches of fluoro tippet to wind up with a 9 1/2-10-foot leader. Just make sure your leader tippet is a size larger than the fluoro tippet you want to add.

For example, if you want to fish a 5X leader just start with a 7 1/2-foot mono leader that ends in 4X.

Other may think differently, but I've been lengthening mono leaders like that for decades.

Regards,

Tim Murphy 🙂
 
Curious, do you guys have any problems with the fluorocarbon sinking your dry fly? Thought I saw a post about this recently.
 
Curious, do you guys have any problems with the fluorocarbon sinking your dry fly? Thought I saw a post about this recently.
Dear 5footfenwick,

Yes, fluoro sinks but the few times I've used it when dry fly fishing a little fly floatant on the leader closest to the fly keeps dry flies in sizes I can still see to tie on floating just fine. It's not for midges for sure!

I maybe should have asked how the OP wanted to fish, I just kind of assumed mills was nymph or streamer fishing.

Regards,

Tim Murphy 🙂
 
The article was written by a guy who works for Cortland. They are trying to sell you a magic potion at almost a dollar a yard. This is what I call buying the hype in fly fishing.

Buying a 7.5’ 4X leader, tie on a tippet ring and add 1.5’ or so of your favorite mono or flouro is a very common thing. I don’t think fluoro brings anything to the table for a top water presentation.
 
Tge only complaint I've heard about mixing mono and flour was flour cutting through the mono, cresting weak connections. Have no personal experience one way or another if that is valid.
 
The article was written by a guy who works for Cortland. They are trying to sell you a magic potion at almost a dollar a yard. This is what I call buying the hype in fly fishing.

Buying a 7.5’ 4X leader, tie on a tippet ring and add 1.5’ or so of your favorite mono or flouro is a very common thing. I don’t think fluoro brings anything to the table for a top water presentation.

I agree with all of this 100
 
I don't know, I've been experimenting for 40 years and I see no big advantage with fluoro. The only real disadvantage to me is the fact that my split shot slides a lot and it doesn't degrade with time. The cost to me isn't enough to make it feasible, but on the other hand, it lasts a long time.
 
I tie my nylon Harvey slack leaders with 5x and 6x Cortland ultra premium fluoro for the tippet section. It’s also what I run for tippet on my euro nymphing rigs. It ain’t cheap but it also shows superior knot and shock loading strength (looking at you, upper Delaware rainbow trout). The 5x has a nearly 6 lb test breaking strength and the 6x is about 4 lbs. That’s roughly 30-40% stronger than the competition, or in other words 6x cortland is of comparable breaking strength to competitors 4.5x- 5x but at a diameter that is several thou thinner. A big deal for getting drag free drifts with very small flies both above and below the water.

The money I save in lost flies and especially nymphing rigs alone easily offsets the cost difference.
 
From my reading of the OP, I think the guy is saying take a 9’ leader and cut the tippet section back a bit before tying in the tippet so that it all turns over better.

I’d bet that would also help in the fluoro not cutting through the mono as the leader mono is now thicker at the point of connection.

I do like Corrland Ultra Premium fluoro tippet. I’ve landed several 20” trout on 6x when using it. It’s my 6x and 7x preference. At 5x and above, I go back to mono.
 
The above poster is correct. If you want a leader to turn over it is best to cut off or at least cut back a portion of the tippet. By adding a fluro tippet to the full tippet it adds too much length and it is like fishing a leader with a 4 ft. tippet.
Using floro does help with it disappearing in the water. Using 4x floro is equal to 5x mono. IMO. I mainly use it for clear water steelhead. Also the floro does not sit upon the water so you do not get the shadow line at the creek bottom thus not alerting fish when it is sunny on slower moving section of water.
As far as cutting mono: I have not experienced it. However if you think that is true then tie your tippet to the leader section that is larger then the tippet. I do not ever remember it cutting my line even catching steelhead with 4x.
 
Back
Top