DIY Rod/reel case

skiltonian

Well-known member
Joined
Jul 6, 2007
Messages
754
Being cheap and have more set-ups than cases to keep the rod/ reels rigged-up for the car, anyone have do-it-yourself solutions so I don’t have to buy more rod/reel cases? TIA! PS-2-piece and 4-piece if it makes a difference.
 
Fully rigged or partially broken down?


Fully rigged, I do this:

PXL_20250809_143718082.RAW-01.COVER.jpg
 
That's my wife's daily driver. I generally leave my gas guzzler in Mifflin county for the Spring/Summer and use this to get there and back on weekends. We have another hatchback I do the same in.
 
What’s in the PVC? I have a similar idea but to notch in a slot for the reel. Oh, broken down, I’ll just keep the rod together if I’m still fishing and my goal is storage at the house,as well.
 
Wire loom like the rod sleeves (Loon?, etc use). You don't need a slot. The wire loom keeps them from sliding out. You'll hate yourself because of the rattling if you put rods directly in PVC in the car with you. I also put wire loom inside of my River Quiver on my SUV to cushion the rods.
 
That's my wife's daily driver. I generally leave my gas guzzler in Mifflin county for the Spring/Summer and use this to get there and back on weekends. We have another hatchback I do the same in.
Thats hilarious and more power to ya for pulling that off !
 
For the PVC, I use 1-1/4" SDR35. It is much lighter than Sch. 40. Around here, Lowes is the only place I know of that sells it. I'm a plumbing/HVAC contractor and even our wholesalers don't carry it.
 
There's also this which is in our van we use for camping. It's an ammo can attached to 4" PVC with dividers. This is something that could be made half length if you want to breakdown a rod into two pieces and fit it in a normal sized car.

PXL_20260202_134108546.jpg
 
That's it, just the loom and the tube.

The only word of caution is being careful with multi fly rigs. Tied to the bend of the hook, they're generally fine. Don't put rigs in where you've tied off of tags or eyes, though. Those get stuck in the loom and you have to pull the sleeve out to free the hook.
 
From one frugal person to another, I simply buy Cabelas rod/reel cases. By the time you purchase everything you need to jerry rig something your only 10 or 15 bucks off from a real case. I like the cabelas double case for 60 bucks, so 30 bucks a rod. Since I usually take two rods with me, with the rods broken down in a smaller case I can better hide the one I’m not using. I’ve tried the homemade route only for them to be thrown out later because they were marginal performers. So in the long run it’s cheaper and more conveinant to just buy a case.
 
I have a half dozen cabelas 2 piece rod carriers 29 $ back in the day and a couple 4 piece.ones that come with the combos I bought from Orvis and I bought a Sage double one on sale for like 59 that was discontinued
 
I won't buy a vehicle without the 9ft test. Wader bag in cargo area. Reel resting in bag an rod tip resting on dash, with space. Middle seat back supporting rod. Beyond that, the 30 seconds it takes to breakdown or set up a rod is insignificant.
 
I won't buy a vehicle without the 9ft test. Wader bag in cargo area. Reel resting in bag an rod tip resting on dash, with space. Middle seat back supporting rod. Beyond that, the 30 seconds it takes to breakdown or set up a rod is insignificant.
Exactly, I brought my 10 ft rod with me to buy my last vehicle. Told the salesman if it don't fit I ain't buying
 
Back
Top