Best Line for Small/Medium Size Streams

Good old Cortland Peachy DT on my 3 weight. 👍

1000012869.jpg
 
The fly line on my go-to setup began taking on some water towards the end of this season, and I was thinking of treating myself to a new fly line to spool up for next year. I'm starting to realize the options are pretty endless, and am starting to consider exactly what kind of taper would suit my fishing and casting style best.

I rarely fish big water and I admittedly don't have a great casting stroke. I typically throw indicator nymph rigs on small/medium size streams (rarely wider than 30/40 feet), but will throw dries when I hit a hatch or am prospecting new water with a dry dropper.

Since I fish smaller streams that are often tight along the banks, along with throwing heavier indi rigs, I roll cast roughly 80% of the time.

I liked the look of Airflo's "power taper" in hopes that the agressive WF taper with a shorter total head length will help easily turn over shorter roll casts, but I wonder if I might be better suited to fishing a DT line since I rarely need to cast far enough to even use the full head length or get into the running line anyhow.

I will likely see if any shops will let me test out a variety of lines prior to making a decision, but I will save that until warmer weather arrives. In the meantime, I'm curious to hear what you all think.
@TheDuke44

I favor 80% of the time bow and arrow casting in small streams being 6’4 standing under a canopy of limbs does not favor my odds. I also will hunker down on both knees to do this.

All my rods are loaded with dt line from sci/angler.

SS
 
I’ve noticed that alot of the DT lines have longer tapers, except for the SA, Cortland, and Airflo (~5, 6, 6/8 ft in order). I have a snowbee line that is the highest floating line i ever used but the taper is around 13 ft. Not good. Airflo is a crapshoot and dont like the peach so that leaves me SA.

Anyone ever tried chopping down the long taper? Say cut back a 3wt to a 6-8 foot taper and use as 4wt. Thinking i could weigh first 30 feet to get it in range, but wonder if doing so would make it overly aggressive.
 
@shakey

Our saying level line for fly rod or level line for Tenkara?

I have a tenkara with a 3.5 level line.
As bamboozled surmised,I do mean traditional level floating line on a traditional fly rod.

A lot of the problems expressed in this thread would be solved by using level line.
For example,tapers that are too long,or,problems roll castingetc
 
I’ve noticed that alot of the DT lines have longer tapers, except for the SA, Cortland, and Airflo (~5, 6, 6/8 ft in order). I have a snowbee line that is the highest floating line i ever used but the taper is around 13 ft. Not good. Airflo is a crapshoot and dont like the peach so that leaves me SA.

Anyone ever tried chopping down the long taper? Say cut back a 3wt to a 6-8 foot taper and use as 4wt. Thinking i could weigh first 30 feet to get it in range, but wonder if doing so would make it overly aggressive.

My experience with long front taper lines is they are best used for tying tomato plants to stakes or aerializing 30 feet of line PLUS a leader, so beyond 30 feet total. In close, they suck...

With that thought in mind, if you cut down a long front taper and can dedicate that line to just short casts under 30 feet TOTAL, you would still be fishing the line weight that was marked on the box, if it is a true to weight fly line.

In regards to being overly aggressive; the SciAngler Mastery DT incorporates a convex front taper which aids in delicacy. Just a hacked down long regular front taper would be more aggressive in close, but less line speed and a tweaked leader should negate that if you and your rod can adjust.

Beyond 30 feet of aerialized line, your rod may feel overloaded.
 
Back
Top