Wading Boot Studs

tjsingle

Well-known member
Joined
Feb 27, 2017
Messages
1,017
City
Downingtown, PA
Hey all-

Any one have any recommendations for studs for wading boots? I just picked up the Skwala Carbon wading boots after my Simms boots finally crapped out after a few seasons. They don't sell their own branded studs, but I figured any brand would work with the vibram soles.

Thanks,
Tom
 
Take a read through these threads:


 
Take a read through these threads:


I use Kold Kutter tire studs. Whichever you chose, don't over-tighten. If you do the studs may pop out. Some suggest not using an electric driver for fear of stripping out the hole.
 
Very happy with Gripstuds.

Kold Kutters are great, especially for the price. I've found adding a drop of gorilla glue at installation and misting your souls with a spray bottle to activate the glue to be very effective at keeping them in place. I've had several stay in long enough to need replacing from wear.
 
I've had zero luck with traditional screw studs in bare rubber soles. I've only had good luck using such screws in boots that have hard plastic stations for them, like Chotas. Otherwise, no magic amount of tightening, or use of glues has kept screws in soles for me.

Imo, It's Gripstuds all the way for use in rubber soles. The only downside is their tiny contact area for each stud, so I use plenty of em. I really wish they'd make a different, larger head style available.
 
Very happy with Gripstuds.

Kold Kutters are great, especially for the price. I've found adding a drop of gorilla glue at installation and misting your souls with a spray bottle to activate the glue to be very effective at keeping them in place. I've had several stay in long enough to need replacing from wear.
I found KK's to wear down extremely fast in my experience. Yeah they're cheap, but between loss and wear, I used them up quick.
 
I use Kold Kutter tire studs. Whichever you chose, don't over-tighten. If you do the studs may pop out. Some suggest not using an electric driver for fear of stripping out the hole.
Yes, finish driving the studs by hand. Always better safe than sorry……….
 
Yes, finish driving the studs by hand. Always better safe than sorry……….
I do/did.

Like I said, no magic amount of tightening or installation keeps conventional screws in my boots. I put a ton of miles on my wading boots and regular screw type studs just don't hold. I think that is where the difference in success comes from. I can easily cover 4-6 miles of fishing and walking in a day.

On the other hand I've yet to lose a Gripstud from any boot and never lost a stud out of Chotas.
 
Back
Top