Talk me in to (or out of ) a trout spey rod

bigslackwater

Active member
Joined
Jul 7, 2011
Messages
836
First I'll mention that I build my own rods, so I'm looking for a project. I already have a 10'8" 7wt switch rod. It's nice for steelhead at Erie, and Smallmouth on the Susquehanna and Potomac but it feels like a big rod for both of those applications. After half a day of fishing with the switch rod, I usually got back to a regular fly rod. I have an interest in building and fishing a trout spey rod, perhaps something in the 11' 3 or 4wt range. I live in south central PA. In all honesty we don't have a lot of water that this particular rod and style of fishing would be useful. Still, I want one! Does anyone have experience using a trout spey rod?
 
I have a 10'8" 5wt that I had built. I have used it a few times to swing streamers and it is fun to cast. I took it to the Lehigh and Delaware and l like it on those bigger waters. I think it would be good on smaller streams too but I have not tried it them.
my 2 cents 🙂
 
Line ratings of spay/swich are 2-3 wts lighter than actual lines the rod could cast.
7wt swich/spay would be a 9-10 wt.
A 4 wt spay would = a 6wt.
 
They're not just for large rivers. I use mine when the Gunpowder is too deep for safe wading. I can step maybe a foot or two into the stream and not have to worry about a backcast.

They're also fun to use for smallmouth.
 
I use an 11’ 4” “Spey” 4wt often. I fish the Lehigh and Delaware and enjoy using it on occasion. It’s handy in areas with little back cast room. Just another tool to enjoy fishing.
 
(Not an expert opinion.)
My casting abilities could never be referred to as "epic", so I've learned that good drifts are more important - to me. I no longer feel the need to reach all the way across a river, but that may have more to do with my personal preference to getting close and fishing a dry fly.
As you mentioned that you (bigslackwater) build your own rods, just make the one you want. You can always sell/trade it later if field-tests are less than satisfactory.
 
Have fun. My bro just gave me his old 11' 3wt and it's fun as hell. Makes bombing out streamers from smallies such a good time.
 
Congrats and hope you like it.....I'll keep an eye open in the swap forum 🤣🤣
 
Here is the finished rod. I purchased this kit from Proof fly fishing. I haven’t cast it yet but it feels good. For the building process the only thing I would have done differently is hand write the rod length and weight. It came with a decal that had stacked text instead of linear. “Proof fly fishing” was on top of “11’ 3/4 wt”. So I had to cut the decal in half. In the process of trying to center and line up the two segments the edges started to curl and loose their adhesiveness. I still did not get it perfectly centered and the curled edges are obvious under the layer of epoxy. This is probably the worst job I’ve done labeling a rod! I always put my name on the other side with the date of build. I will be getting a reel lined up today. Hope to do some back yard casting this evening and get it on the water sometime this week.
 

Attachments

  • IMG_4804.jpeg
    IMG_4804.jpeg
    380.2 KB · Views: 46
  • IMG_4805.jpeg
    IMG_4805.jpeg
    321.5 KB · Views: 49
  • IMG_4806.jpeg
    IMG_4806.jpeg
    393.1 KB · Views: 50
  • IMG_4807.jpeg
    IMG_4807.jpeg
    401.5 KB · Views: 48
  • IMG_4808.jpeg
    IMG_4808.jpeg
    284.8 KB · Views: 48
  • IMG_4809.jpeg
    IMG_4809.jpeg
    350.2 KB · Views: 43
  • IMG_4810.jpeg
    IMG_4810.jpeg
    374.6 KB · Views: 45
Congrats and hope you like it.....I'll keep an eye open in the swap forum 🤣🤣
Lol! dont hold your breath, I'm more of a hoarder of gear! You'll have to wait for the estate sale when they cut the pad lock on my fishing shed!
 
I would never tell someone not to build a niche rod if at some point they were going to use it! Or at least take it for a walk 😄
 
Back
Top