I stopped by in the evening to check on angler usage. It was certainly not crowded an those who were there were catching a few fish on honeybugs and spinners. I was pleased that the entire DH area was float stocked so, if past experiences are any indication, the entire length should provide good fishing. No need to wait for the fish to spread out. The volunteer floaters did a great job!
Mike wrote:
I was pleased that the entire DH area was float stocked so, if past experiences are any indication, the entire length should provide good fishing. No need to wait for the fish to spread out. The volunteer floaters did a great job!
I know of only one WCO who has constructed float "boxes." In that case they were actually modified plastic barrels (35 gal I think) of the type that Maurice's crew uses on Muddy Creek. I would say that in 99% of the cases that I have seen the sportsmen have constructed the float "boxes." I would add that I have seen trout floated downstream in rubber rafts filled with water (the individuals walked along the rafts, guiding them downstream and scooping trout out every so often).
Much of the float stocking in my neck of the woods in done by TU volunteers. In many cases, they use home made wooden boxes. These would be square, about 3' on each side and made of boards about an inch thick and about 15" tall. The bottom of the box is enclosed with narrow mesh wire and a couple of the box sides have added foam floating material and rope handles. I've really only seen this type and the plastic barrel type that Mike described. I've often thought it might work to lash 2 or 3 of these type containers to the side of a canoe and walk it downstream if one were limited to a couple guys.
How about a large innertube from a tractor tire? I suppose you can suspend a cage from the inside diameter with ropes tied around the tube. Thanks. Any other ideas?