Line weight

RH1

Well-known member
Joined
Nov 6, 2025
Messages
403
City
Massillon
So i just picked up a lightly used lamson liquid -7+ 3pack. The spools all have 7wt line on them but I am going to put the reel on my 8wt rod for pike fishing.
Can I get by with the 7wt line or should I just plan on changing out the lines?
Heck it might be cheaper to buy a 7wt pike rod than replace all that line 🤔
 
I know the weather isn’t exactly conducive to casting, but I’d try casting the lines on your rod before you buy anything. A lot of lines made these days are purposefully overweighted, so some of these might actually be 8 weights according to the AFFTA system
Good thought. Im a rookie with this so I appreciate any advice. The reel will be here Tuesday so I will give it a go
Thanks
Ron
 
Since you got a 3 pack, why not re-line one spool with 8wt or 9wt so you have variety. I'm not sure why you would have all 3 spools lined the same.
1 spool is loaded with 7wt floating 1 is loaded with intermediate and 1 is loaded with full sink
 
Ignoring a ton of variables like casting skill, fly weight, wind speed and rod design, underlining a rod will sacrifice short distance casting and improve long distance casting.

Again, that is ignoring the many variables that are possible.
 
  • Like
Reactions: RH1
I'll embellish on gunpowderglass' recommendation and try & reach out to the person who sold you the reel & lines and see if they remember what the line MAKER & MODELS are on the spools AND what rod they used with the lines. That should enable you to drill down to the line's weights and tapers and the rod action.

IF you can get that information without making a cast you'll have a better understanding what you ACTUALLY have on those spools and how the lines will behave on YOUR rod.

I'll also add that because you have a "set" of 7 weight lines, in 2026 the previous owner's targeted species probably WASN'T trout. If that assumption is true, it increases the likelihood of overweight or aggressively tapered lines.

That doesn't mean your rod will like them, but I know you won't like a 7wt for pike. Bottom line, you may have to pony up, but maybe only for a floater and an intermediate line...

Good luck!
 
  • Like
Reactions: RH1
I'll embellish on gunpowderglass' recommendation and try & reach out to the person who sold you the reel & lines and see if they remember what the line MAKER & MODELS are on the spools AND what rod they used with the lines. That should enable you to drill down to the line's weights and tapers and the rod action.

IF you can get that information without making a cast you'll have a better understanding what you ACTUALLY have on those spools and how the lines will behave on YOUR rod.

I'll also add that because you have a "set" of 7 weight lines, in 2026 the previous owner's targeted species probably WASN'T trout. If that assumption is true, it increases the likelihood of overweight or aggressively tapered lines.

That doesn't mean your rod will like them, but I know you won't like a 7wt for pike. Bottom line, you may have to pony up, but maybe only for a floater and an intermediate line...

Good luck!
All the seller remembers is that the full sink and sink tip are a Scientific Angler line and the floating is a max catch outbound short line
 
All the seller remembers is that the full sink and sink tip are a Scientific Angler line and the floating is a max catch outbound short line

The MaxCatch Outbound line has a compact extra heavy head. My best guess based on some quick research is the 30 foot head weight is 330 grains which is an 11 wt line in my books!!

FWIW - A TRUE to WEIGHT (TTW) 7wt line weighs 185 grains while an TTW 8 weight line weighs 210 grains.

The possibility exists you MAY like that line on your 8wt if it is fast. Give it a try, but keep in mind the way that line is designed; have about 10-20 feet of line out past the tip top when casting and shoot the rest of the line you want to deliver with the fly.

In regards to the Sci Angler lines, #1: What color are the Sci Angler lines and #2 Do they have welded loops and the SA Line ID marked on the lines? If the answer to #2 is no, they are most likely SciAngler budget lines meaning it is more likely to be close to or TTW.
 
The MaxCatch Outbound line has a compact extra heavy head. My best guess based on some quick research is the 30 foot head weight is 330 grains which is an 11 wt line in my books!!

FWIW - A TRUE to WEIGHT (TTW) 7wt line weighs 185 grains while an TTW 8 weight line weighs 210 grains.

The possibility exists you MAY like that line on your 8wt if it is fast. Give it a try, but keep in mind the way that line is designed; have about 10-20 feet of line out past the tip top when casting and shoot the rest of the line you want to deliver with the fly.

In regards to the Sci Angler lines, #1: What color are the Sci Angler lines and #2 Do they have welded loops and the SA Line ID marked on the lines? If the answer to #2 is no, they are most likely SciAngler budget lines meaning it is more likely to be close to or TTW.
Here is a picture of the lines.
All lines have a welded loop and NO writing on any of the lines.
My assumption is the black is full sink
The green is floating and the multi color is the intermediate?
 
Cast the lines with a few of the flies you actually intend to use. I'm assuming you are going to be fishing fairly large flies.

If the lines are insufficient for real world use, it doesn't matter how much your rod "likes" a particular line. The discussion is pointless if the whole system comes up short during actual use.
 
Here is the picture that I forgot to attach.
20260224_164936.jpg
 
Cast the lines with a few of the flies you actually intend to use. I'm assuming you are going to be fishing fairly large flies.

If the lines are insufficient for real world use, it doesn't matter how much your rod "likes" a particular line. The discussion is pointless if the whole system comes up short during actual use.
You are Correct..
Im setting this up on my 8wt to fish for pike and bass so there will be some large flies used.
 
So i just picked up a lightly used lamson liquid -7+ 3pack. The spools all have 7wt line on them but I am going to put the reel on my 8wt rod for pike fishing.
Can I get by with the 7wt line or should I just plan on changing out the lines?
Heck it might be cheaper to buy a 7wt pike rod than replace all that line 🤔
Remember too that pike flies can be heavy to the point of needing to underline for a particular rig - as stated, cast it with a sacrificial hookless version (cut the hook at the bend) of a pike fly - and remember that all rods will handle at least a couple of weights of fly lines depending on how much line being used in a cast - a lighter 7 line canbe cast further on a 8 rod with the same amount of kinetic energy as a shorter cast with an 8 line - either way, the Lamson reels are always a good reliable choice!
IMG_7287_Original.jpeg
 
  • Like
Reactions: RH1
Back
Top