As Tim said, they are Aetna Foulproof guides.
The Aetna Products & Manufacturing Co. of Burbank, Calif. manufactured the Foulproof guides for many years starting back in the 1940's. The company held at least two U.S. patents on fishing rod guides from 1949 and 1956. Gudebrod distributed the Foulproof for Aetna from the mid 1960's until the Aetna Company ceased operations sometime in the late 1970's or 1980’s.
There are 2 different styles; “low profile” with a short leg at a 45° angle and the regular with a 90° short leg. They also come in light wire, and heavy wire. They are sized in inches based on the outside diameter of the ring.
Between 1956 and 1978, Fenwick built many rods using Aetna Foulproof guides. Fenwick stopped using them in the late 1970's on production rods, but continued to buy them for use in refurbishing older rods until 1985.
During that same period, Fenwick was also using Mildrum and Perfection guides on casting and spinning rods. In the late 1970, most spinning and casting rods switched to Fuji guides and then PacBay guides in the early 1980s.
Most of the Aetna Foulproof guides were made out of Monel wire not stainless steel. In some years, the Monel wasn’t plated with hard chrome. This led to line grooving the guide and the tip top, the reason that so many rods with Foulproofs had to be replaced at the Fenwick factory.
Later, Aetna was chrome plating the guides to help avoid this problem but by then ceramic insert guides became popular.
You can still find them on eBay and there are newer versions. They are still popular because they are lighter and don’t foul. I own at least one vintage Orvis Bamboo Rocky Mountain spinning rod with Aetna Foulproof guides but I'm not a fan.