...Man, I feel like some dinosaur still tying blood and nail nots making my own leaders up.
Initially like most folks, I bought my leaders at a fly shop with 7-1/2 foot and 9 foot being the norm. I started with extruded leaders that were popular but, I quickly discovered they WERE going to end up with at least one knot.
Many times I wasn't getting the performance I wanted. However, because they were extruded, I was reluctant to cut off more than the "tippet" part in an attempt to change the performance. At that time, I switched to store bought knotted leaders that "seemed" to turn over better and it was easy to see each section of the taper.
If the knotted leaders weren't performing to my liking, because I could see the sections and I carried (and still carry) an Orvis "Gage-It“ line diameter measuring tool, I'd tweak the formula on the water. Later I decided to tie all of my own knotted leaders based on formulas I gleaned from books, (which will tell you how long ago that was) and some of the knotted store bought leaders I liked.
I put the formulas in a small notebook (which I still have) and I'd keep that in a Ziploc bag with a micrometer. I used to spend late nights and winter afternoons in my NYC apartment watching reruns on Channel 11 and tying leaders; LOTS of leaders!! For that reason for me, tying blood knots is a breeze.
Later, I experimented with just about every "fad" leader that came down the pike including leaders with lighter butts, double taper leaders, leaders with soft supple flat mono butts, poly leaders, hollow butt mono leaders, braided butt, furled and woven leaders.
Because of all the leader tying and modifying I learned a LOT about leader construction and behavior and how to tweak any leader in the field when a fly wasn't turning over properly or I had some other problem. I also learned how to make my own leader with a portion of another.
An example; Orvis used to sell a very nice braided butt nice leader they called a "Bimini leader." I liked them, but only used the upper furled part because the taper wasn't right for every situation. I did the same thing with poly butt leaders which I was a fan of for awhile and the hollow mono butt leaders offered by Orvis.
All of this translates to furled, braided, woven, poly and other leaders...
You ARE at the mercy of the leader builder's taper "formula" in regards to the butt section. However, you CAN fiddle around with what goes after the furled/braided/woven/poly part. This is the reason I NEVER just add tippet to a furled leader and venture to guess most turnover issues experienced by folks could be cured with a shorter furled part and/or some 2X or 3X transition sections
Bottom line, BECAUSE you are a "dinosaur," I'll bet you a $100 bucks IF you try a furled leader and don't like it, you will be able to "fix" it...
In the meantime, I still tie all of my warmwater/streamer leaders with knots and if I am deep nymphing with more than one fly, 99% of the time I still prefer a knotted leader I made myself.