Fiberglass Rod Feedback

I have a Fenwick 7-1/2 ft 6 wt from the late 70s early 80s and a new 8-1/2 ft 6 wt superfine, unless I'm exclusively streamer fishing bigger water there all I use for trout these days,today was one of those and carried the 10 ft 7 wt ,knocking off the dust for steelhead !!!
 
A busy week had me miss this thread, which as I read it at the start of this long weekend, makes me even more appreciative of this community of knowledgeable anglers.

As someone who drank the kool-aid and fishes bamboo & glass pretty much exclusively anymore, there's really nothing more I can immediately add; other than to stress you try to cast ( even borrow and fish with, if possible) as many different glass rods as you can, to get a taste for how they tick, and how they might suit your game.

The whole 'slowness' thing as far as action, is maybe a little over blown to me. In a word, yes, generally glass is going to be 'slower' than graphite, but the way that 'slowness' unloads casting energy to the line, IMHO, can be anything but slow on that final forward stroke. This specific aspect of glass and bamboo,as rod materials, which maybe is just a little more noticeable to me and others, is what makes it work best for me.

The conditions of the day dictate whether I am fishing dries, wets or nymphs with the glass rod I took. On a laurel choked mountain stream or even a small spring creek here in the Driftless, it will probaby be something <8' long, < 6 wt, probably starting with a dry dropper, going to old school upstream nymphing when reality sets in. This would be where I use my Fenwick FF75-2, FF70-4, Cabelas CGR 6'6, Conolon Fanwing.

If fishing something more like Penns or the LJ out in PA, then it would be the FF75-2, Conolon Fanwing, Heddon T-70 8-1/2'.

Notice that Conolon Fanwing and the Fenwick FF75-2 made both scenarios.

For newer glass rods, actual rod weight may not be a huge issue, but with some vintage glass, especially stuff rated for bass and chromers (your 8-1/2'ers, 7wt and up) are going to be club-like compared to modern carbon, they might leave a mark. Then, there is the issue of a reel and line setup to balance the heavier vintage rod. That doesn't mean they won't cast well, just that hand/wrist fatigue can be an issue on those antiques. You will notice it. This would be my Heddon T-70. It's a man's rod, owed to it being amongst the earliest production glass; the glass formulation itself and ways they wrapped the mandrels to make those early rods just made them heavy. The Conolons, some Shakespeares, Phillipsons, are probably the only exceptions to that heaviness generalization amongst those early 1950s rods, and even they are heavier than modern glass. Fenwick, IMHO, with their, at the time, innovative Ferralite fiberglass ferrule design, leap frogged some of their competition in making a light, dare I say, 'faster' glass fly rod.

The other boards the other guys mentioned are loaded with info, going back more than decade. I finally signed up on both (fiberglass flyrodders, and classic rod) after lurking for years, but haven't even posted yet due to time constraints. Clearly lots of very experienced users and collectors of glass fly rods to draw knowledge from.

(Since I get back to PA so often, I decided to use my slice of time to participate on your board; of the three that I lurked on most🤠)
 
Last edited:
I ended up going with an Orvis Superfine Glass 7’6” 4 wt. coupled with the Battenkill II with an SA Mastery Double Taper line.

Have had it out twice so far and really love the way the rod loads and casting it. Got this one recently -

IMG_6177.jpeg
 
Measured out at 15”. Hefty as well - largest ones I had caught prior to this one were in the range of 8-11”. This one really made it all worth it.
 
bamboozle: "I refuse to over-line NOT because I am afraid to fish a 5wt or 6wt line on a small stream, but because I WANTED a short 3wt or 4wt rod to fish on a small stream using the small reel that balances it the best. I also want to use my regular favorite full length line, not something cut down or purposely made shorter to fit on a small reel."

I am not a glass person, but agree that a potential advantage of glass in short fly rods is that their higher weight (think of rod on scale measuring ounces) versus lighter nonglass rod lets you use a more normal small reel w full length line while keeping balance at a good level. I know balance isn't always considered, but using that same reel on a much lighter nonglass rod of the same length might not be optimal for casting. (try a very light reel on an 8' fly rod and you'd get another balance issue).

balancing a very short very light fly rod takes a crazy light reel.
 
Back
Top