Bamboo question

SlingingWets

Well-known member
Joined
May 23, 2025
Messages
260
City
Eastern Pennsylvania
anyone into Bamboo Rods? I was going through some of the things my grandfather gave me years ago and one of those things was a South Bend bamboo rod. Inside the tube with a screw on metal cap is a cloth protector with a tag and 2 different length tips. I have little to no knowledge of bamboo but I’m sure some of you can enlighten me. Here’s a pic of the rod/tips in the bag.

IMG_0323.jpeg
 
Typically the two tips would be the same length with most bamboo rods, which might indicate that one of yours was broken and repaired at some point. South Bend made some desirable rods, but they tended to be more blue collar than some manufacturer's rods. Typically a 9' rod would also be less desirable than a shorter rod, but no doubt that it would still be collectable and certainly rather cool.
 
If the tips are different lengths, then at least one of them is broken. All four parts should be the same length.

As rule of thumb, South Bend rods with three digits in the model number (like the 346 here) were trout tapers. (Two digit rods were bass tapers.) That said, I don't know anything about this particular model.

South Bend rods are considered "blue collar" rods -- that it they were affordable for a working man. On the plus side, most of the tapers were designed by Wes Jordan before he become head of production for Orvis, so it might be a good caster. At 9 feet, it's going to be heavy.

I problem that I've had with several SB rods is the glue that holds the reel seat on has dried out and the reel seat has fallen off. Check that it's tight before trying it out. Start with a 6 weight.
 
If the tips are different lengths, then at least one of them is broken. All four parts should be the same length.

As rule of thumb, South Bend rods with three digits in the model number (like the 346 here) were trout tapers. (Two digit rods were bass tapers.) That said, I don't know anything about this particular model.

South Bend rods are considered "blue collar" rods -- that it they were affordable for a working man. On the plus side, most of the tapers were designed by Wes Jordan before he become head of production for Orvis, so it might be a good caster. At 9 feet, it's going to be heavy.

I problem that I've had with several SB rods is the glue that holds the reel seat on has dried out and the reel seat has fallen off. Check that it's tight before trying it out. Start with a 6 weight.
Thanks! This thing is pretty much what I would consider mint condition. A little staining on the cork handle but no deterioration. I also found an old fenwick 4 weight travel fly rod that I believe is fiberglass. Model number is SF74-4 I think. Also near mint.
 
Dear SlingingWets,

The 3-digit South Bend rods were their highest-grade rods. They were generally trout rods. How long is the rod when it is assembled with the full-length tip? If it is 8 1/2 feet, or even 9 feet throw a Cortland Peach 444 in DT 5 or WF 6 on it and commence to using it as long as the ferrules and guide wraps are in good condition.

I have 8 1/2-foot South Bend rods in model 323, 346, and 359. All of them are little different but very nice rods to fish with.

Regards,

Tim Murphy 🙂
 
FWIW - Here are the care instructions found on the tag of a Payne rod:

Never twist your rod in putting it together or taking it apart​
Don’t put your rod away in a damp bag​
Keep rod in dry cool place when not in use​
Do not grease or emery the ferrules, they fit properly if kept clean.​
 
It never ceases to amaze me how much knowledge is available on this forum, both fishing related and in general. I’m proud to be associated with you guys and gals. Proof positive that at least a small corner of the internet is valuable and “safe” 👍🇺🇸👍
 
I was always told the 3xx rods were the "dry fly" action and the 1xx rods were the "wet fly" action, but after 80 years all bets are off on how it feels in your hand.

Surprisingly, no one mentioned the important thing: Keep the metal ferrules clean and don't polish them or lubricate them. Assemble only with a straight pull or push, never twist.

If they don't click when you put it together and give it the test wiggle, they're good to fish. It's probably a 6wt, but the letters on it will tell you.

Your Fenwick is an SF-74 is a spin/fly combo, and a 6 weight line. Oh. Bam already got that. WEll, now you read it twice and I'm prettier.
 
I have a '346. Mine is an 8-1/2' rated for HEH line ~ modern #5/#6. Easily one of my favorite rods to use on medium size, or larger streams.

Clip from the South Bend 1954 catalog listing for the '346, though it was available for years prior 1954 as well:

Screenshot_20260301-204819.png

That's ~ equivalent to $270 today, depending on what inflation/CPI calculator you use.

Not long after, I believe South Bend, and most of the American rodmarkers of that time, (Montague, Horrocks Ibbotson, Heddon, Granger, etc ) pretty much halted bamboo fly rod prodction as a result of the embargo with China, that prevented the importation of Tonkin cane; which was the essential raw material for split cane fly rods. Not only that, but fiberglass was starting to come on the scene as well. Glass rods were much cheaper to build than cane, and easier to maintain.

Joe
 
Last edited:
I would put a 6wt on it and fish the heck out of it.
That would be a nice rod for wets
I agree get a 444 Cortland or a 406 company line and put it through the paces.
 
Or any other true to weight, regular tapered DT or WF line, or even a level line which were popular when that rod was made.

For example 444 Peach, Air Cell, SciAngler Mastery DT, or the Rio Premier Lightline WF & DT.
 
Would love to see some pictures of the rod at least the reel seat.
I think I own one. No marks 8' 3 pc casts a 5-6 wt (exact weight) modern fly line real nice.
 
I only have one 406, but I am a tremendous fan and will no longer buy the Cortland Sylk sinktip lines....
Agree, I have a 5 wt Cortland Slyk that’s a very meh line to me. Conversely, I love my 5wt 406 line.
 
Back
Top