Bamboo fly rod identification

JMP

Well-known member
Joined
Jul 23, 2011
Messages
345
I received a bamboo fly rod as a Father’s Day gift from my son on Sunday. He stated the individual he purchased it from stated is was a WW II bamboo rod. There are no identification features on the rod. It came in a spare gun barrel sleeve and has two tips. He was told one tip is for flies and the other is for bait.
Any insight on how I can identify the rod or determine its weight? I will try to obtain more information when he is here for Sunday dinner tomorrow.
Thank you
 

Attachments

  • IMG_0168.jpeg
    IMG_0168.jpeg
    284.6 KB · Views: 163
  • IMG_0170.jpeg
    IMG_0170.jpeg
    315.5 KB · Views: 167
  • IMG_0171.jpeg
    IMG_0171.jpeg
    297.3 KB · Views: 172
  • IMG_0172.jpeg
    IMG_0172.jpeg
    389.1 KB · Views: 167
I'm not an expert, but I am pretty sure it is a Montague Clipper which was available in 8'6", 9'0" & 9'6" lengths. I'm not sure of the vintage.

I don't "believe" Montague ever made two tip rods with two different tips so my suspicion is the shorter tip is either a repaired broken tip or a tip from a different Montague rod.

As far as line weight goes, avoid experimenting with "trick taper" or overweight lines fly lines. I'd start with a 6 weight, true-to-weight, standard taper line like a Cortland 444 and go up or down from there in line weight based on your casting stroke & rod action preferences.

I hope this helps a little.

Enjoy your present!!
 
All,
Thank you for the information. The rod measures 8’6”. What remains of a decal above the reel seat appears to be Mo, so I believe this is a Montague.
 
Definitely a Montague, likely a Sunbeam. That type reel seat was common with different color plastic spacers, and sometimes all brass nickel plated. The ferrules, unless they were replaced, are nickel plated brass, which often develop hairline cracks. The barrel cover is a nice item. Wish I had one.
 
Clean the ferrules inside and out before assembly, I used rubbing alchohol on cotton swabs for the female and on some cotton gun patches for the male. Assemble and dissamble with straight movements only, otherwise you risk delaminating the old glue at the ferrules.

You'll also want to maybe secure your loose thread wraps there. There's a right way to do it, and then there was my quick hack way which was a lil bit of superglue and pulling them back onto the existing wraps and not the bamboo.

DOing it properly would be a better idea, though. Hey, I jsut wanted to fish my first beater.

As noted, it's probably a 6wt and if you decide to buy a new line down the road, there's some that come with thinner diameters for the old small guides, but it's not really neccessary.
 
Just for fun: AI search

The fly rod in the image is a Sharpe's of Aberdeen "The Scottie" impregnated split cane fly rod.
Details of the rod shown in the image:
Material: Impregnated split cane, which is a classic material for fly rods.
Features: The image shows a cork handle and a bronze-colored ferrule, consistent with descriptions of "The Scottie" models.
Condition: The rod appears to show some wear, including visible damage near the ferrule and some fraying on the line guide whipping, suggesting it is a vintage or well-used item.
 
Just for fun: AI search

The fly rod in the image is a Sharpe's of Aberdeen "The Scottie" impregnated split cane fly rod.
Details of the rod shown in the image:
Material: Impregnated split cane, which is a classic material for fly rods.
Features: The image shows a cork handle and a bronze-colored ferrule, consistent with descriptions of "The Scottie" models.
Condition: The rod appears to show some wear, including visible damage near the ferrule and some fraying on the line guide whipping, suggesting it is a vintage or well-used item.
Ha!

Although aside from having the wrong reel seat, rolled rather than soldered ferrules, American twist guides, the wrong winding check, the wrong wraps, the wrong writing on the rod, the wrong grip and pretty much the wrong every other identifying feature, it's close.
 
Ha!

Although aside from having the wrong reel seat, rolled rather than soldered ferrules, American twist guides, the wrong winding check, the wrong wraps, the wrong writing on the rod, the wrong grip and pretty much the wrong every other identifying feature, it's close.
Right? The sticker, or what's left of it was what I knew. I tried all four pics and this was the "best" it could do.
 
It is a Monty. The model several things I questions that throw me off. The ferrules are pinned if they are loose replace the ferrules because if it is just the pins holding the ferrules you can damage the bamboo underneath. You can get stepdowns that fit. A lot of them did come with an extra tip but the tip top on the one has been replaced that is the way it looks in the photo to me. Make sure it is sounds and give it a cast. I would start with a 5wt just to see how a little stress does then move up lines. If you hear clicking or doesn’t fill right recheck check the ferrules. Have fun with it.
 
Sorry you need to remove the pins before you start to remove the ferrules.
 
All,
I appreciate all of the information you have provided.
Thank you,
Joe
 
I had the opportunity to try the rod this morning on a local creek. I was able to land 4 trout. I was fishing a #18 blue quill emerger on a flat water section. The bamboo is noticeably heavier than my standard rods.
 
I had the opportunity to try the rod this morning on a local creek. I was able to land 4 trout. I was fishing a #18 blue quill emerger on a flat water section. The bamboo is noticeably heavier than my standard rods.

Congratulations!!

As someone who routinely fishes bamboo rods at 8'0" - 8'6", the weight is something that you'll get used to and something that can mitigated somewhat by using a heavier reel.

If a longer rod, ESPECIALLY a longer bamboo rod isn't balanced with a heavier reel, you'll really feel the weight in your wrist & forearm even just holding the rod out in front of you.

To achieve the balance I like which is right at the winding check, the reels I use on my bamboo rods at those lengths have a stated weight (meaning what the manufacturer says the reel weighs empty) of 6+ ounces.

That's not an easy weight to find in modern production reels with the exception of VERY expensive custom bench made offerings. The good news is there are many affordable vintage reels from makers like Pflueger, Shakespeare, Martin and others AND there are ways to add weight to an existing reel.

Enjoy!!
 
Back
Top