>>Note: The cap may still be hard to remove after thawing.>>
One thing I've done with Aquaseal that seems to help some with keeping it viable and reusable is to be sure that when I first open the tube, I make a pretty good size bore hole in the opening, like almost the full diameter of the available opening. Then when you've finished using it, squeeze the tube gently and release it. This (if done right..) can serve to aspirate back down into the tube any excess that is currently in the neck and make the tube easier to open next time. If you then tighten down the cap firmly, the stuff will last longer before hardening. Not nearly as long as freezing it, which is the gold standard, but enough to get by if you're on a trip and no freezer is handy.